ALT3
- Very small size
- Very low weight
- Plug-n-Fly: no software setup, no calibration
- Easy hookup: interface to industry standard RC receivers and servos
- 2 versions: ALT-E (elevator control) or ALT-T (throttle control)
- Non-volatile program storage: allows embedded programs to be updated in the field *
- Pitch attitude control: uses a SMT barometric sensor for vertical speed control
- Altitude hold: uses a SMT barometric sensor for altitude sample and hold +/-1 ft accuracy
- Electronic mode switching: manual and auto modes ( via RC aux. channel )
- Manual ALT over-ride: climb or descend during altitude-hold mode
- Gain adjustment POT
Specifications
-
PCB Size: 2.0"L x 1.0"W x 0.55"H
-
PCB Weight: 0.3oz ( 0.6oz with RC connectors )
-
Max. Altitude: 15,000 ft MSL
-
Altitude Hold: +/- 20 ft ( level flight )
- Power: 5.5v - 7.0v @ 50ma ( idle )
Note: Not recommended for helicopters, rotor turbulence interferes with sensor.
|
|
