The PICOPILOT-N performs GPS navigation and turn-rate control (wing leveling). PICOPILOT was designed for rudder-only, electric motor-gliders (without ailerons ) but it can be adapted to control slow, stable planes (with ailerons). It can also be used to navigate ground vehicles and boats. Designed to interface with most modern RC receivers and servos. 3v RC receivers will require buffers for all Picopilot connectors. The -N is a good choice for hobbists and those trying autonomous control for the first time.
Specifications
PCB Size: 2.0"L x 1.0"W x 0.25"H
PCB Weight: 0.6oz ( 1.7oz with PICO-GPS )
Max Airspeed: 50 mph (depends on airframe stability )
Min. Airspeed: 5 mph
Turn radius: ~100ft @25mph
Attitude control loop: 3 Hz
Power: 5.0v to 7.0v @ 25ma
Recommended for fixed-wing aircraft with a gross weight of 1 ~ 5 lb.
Not recommended for helicopters.
This autopilot system has been classified 9A012 by the US Commerce Department and requires an export license ( except Canada ).
Copyright (c) 1995-2010 UNAV, LLC All Rights Reserved
